Flex Bow Pocket Kit (2 Pockets with Hardware)

Flex Bows are a bit of a miracle, but they need a special bow pocket bracket to mount to your trailer. The steel pockets have a drain hole in the bottom which prevents water from collecting or freezing at the ends of the flex bow, which will prolong the life of your bow, pocket, and trailer! (Please note, metal finish may vary)

Flex Bow Pocket Kit Contains:

• (2) Flex Bow Pockets
• (8) 3/8" x 1" Coated Self-Threading Hex Bolts

Flex Bow Pocket Installation Instructions:
1. Clamp bow pocket flush with top rail
2. Use the pocket as a template to mark and drill four 5/16" holes
3. Secure with 4 3/8" x 1" self-threading bolts.
4. To ease bow insertion, leave the screws loose until the bow is inserted into the pocket, and then fully tighten.

Please feel free to Contact Us with any Questions. Thank You!