Flex Bow Pocket (1 Pocket, No Hardware)

Flex Bow Pocket for mounting flex bows to your dump trailer.

This is one single replacement galvanized pocket with no hardware. For new flex bow installations, you will need a kit containing two flex bow pockets and mounting hardware. Two are required per flex bow, which are typically installed every 42" down the length of trailer bodies to support side roll tarp systems.

Flex bow pocket installation instructions:
1. Clamp bow pocket flush with top rail
2. Use the pocket as a template to mark and drill four 5/16" holes
3. Secure with 4 3/8" x 1" self-threading bolts (not included).
4. To ease bow insertion, leave the screws loose until the bow is inserted into the pocket, and then fully tighten.

Please feel free to Contact Us with any Questions. Thank You!