Steel 45 Degree Elbow (1 Elbow with Hardware)

A 45 degree elbow in the arms of our steel dump truck tarp system can prevent costly damage and lost time by routing the tarp arms out of the way of loaders and excavators, reducing the likelihood of an accidental collision with the arms. Equipment operators move fast and don't always have a clear line of vision, so clipping the tarp arms while dumping into the truck bed is a common occurrence. Adding a bend to your arms give them a little more clearance to work with and will extend the life of your tarp system.

They are easy to splice in, so you can add them later after the initial tarp system install. Accidents do still happen, so if you need to replace both sides, you can purchase a 2 pack here.

Comes with (1) 45 degree steel elbow, (2) 5/16" x 1-3/4" Bolts, (2) 5/16" Nylock nuts, and (4) 3/8" Washers.

45° elbows are the most common, but for less of a bend, check out our 30 degree elbows.

Please feel free to Contact Us with any Questions. Thank You!