109025 Cramaro (OEM) Slip Clip w/ Bolt and Locknut for Mesh Cable Tarps

109025 Cramaro (OEM) Slip Clip w/ Bolt and Locknut for Mesh Tarps

To prevent mesh cable tarps from shifting side-to-side, slip clips are used with all mesh tarped systems. Use 1 set if your system is up to 20 feet; 2 sets if up to 30'; and 3 sets if more than 31'.
1. Crank the tarp fully to the rear and place the handle in the locked position. Your tarp should not have any slack at this point in the installation and should be 1" -2" from contacting the front of the rear bracket. Make any adjusts now prior to finishing this step. 2. Locate where the slip clips should be mounted making sure they are placed evenly on both sides of the body. Place the slip clip on the top of the plastic bow end bolt in place with a 3/8" x 2 -1/4" bolt and locknut through the predrilled hole in the plastic end.

Please feel free to Contact Us with any Questions. Thank You!